Fenix FD45

Description:

Fenix FD45 is a high-performance rotary focusing flashlight, which easily regulates the focus between spot and floodlight. It is fitted with Cree XP-L HI neutral white LED, which emits a max output of 900 lumens and beam distance of 330 meters. Powered by readily available 4 AA batteries, the light features five output levels plus strobe and SOS. Neutral white light for better color rendering and 94° floodlight for wide-range viewing. FD45 is super suitable for daily use and outdoor activities.

Features of Fenix FD45:

• Uses Cree XP-L HI LED with a lifespan of 50,000 hours
• Powered by four AA batteries
• Turbo
  • 900 lumens
  • Ni-MH: 1 hour 30 minutes
  • Alkaline: 2 hours 10 minutes
    • Spotlight: 1,082.7 feet/330 meters
    • Floodlight: 151 feet/46 meters
•  High
  • 350 lumens
  • Ni-MH: 4 hours 20 minutes
  • Alkaline: 8 hours 50 minutes
    • Spotlight: 636.5 feet/194 meters
    • Floodlight: 91.9 feet/28 meters
•  Med
  • 150 lumens
  • Ni-MH: 11 hours 50 minutes
  • Alkaline: 12 hours
    • Spotlight: 416.7 feet/127 meters
    • Floodlight: 59.1 feet/18 meters
•  Low
  • 50 lumens
  • Ni-MH: 29 hours 50 minutes
  • Alkaline: 30 hours
    • Spotlight: 262.5 feet/80 meters
    • Floodlight: 42.7 feet/13 meters
•  Eco
  • 5 lumens
  • Ni-MH: 160 hours
  • Alkaline: 200 hours
    • Spotlight: 95.1 feet/29 meters
    • Floodlight: 26.2 feet/8 meters
•  Strobe
  • 900 lumens
•  SOS
  • 50 lumens

• Lockout function
• Momentary on Strobe
• High-efficient TIR optical focusing lens
• Single side switch
• Digitally regulated
• Reverse polarity protection
• Intelligent overheat protection
• Durable aircraft-grade aluminum
• Premium type III hard-anodized anti-abrasive finish
• IP68 rated protection

Dimensions and Weight:

• Length: 4.8″ / 121.8mm
• Diameter: 1.5″ / 39mm
• Head Diameter: 1.6″ / 40mm
• Weight: 7.3oz / 206gm

Operation Instructions:

ON/OFF
In unlocked status, press and hold the switch for 0.5 seconds to turn ON/OFF the light.

Output Selection
With the light on, single click the switch to circle through Turbo?Eco?Low?Med?High. (The factory default output level is Turbo).

Flash Mode
In unlocked status, press and hold the switch for 1.2 seconds to enter Strobe. Single click the switch to circle through Stroke?SOS. Press and hold the switch for 1.2 seconds once again to turn back to previous General output level.

Spot and Floodlight Adjustment
Rotate the focusing ring to regulate between spotlight and floodlight. Clockwise regulate gradually to floodlight. Counterclockwise regulate gradually to spotlight. (The factory default is between spot- and floodlight. The focusing ring could be a little tight for first rotating.)

Lockout Function

• Lock
  With the light turned off, continuous single clicking the switch twice within 0.5 seconds, the light will blink twice on Low and then switch off to indicate locked status.
• Unlock
  With the light locked, continuous single clicking the switch twice within 0.5 seconds. The light will be unlocked and activated on last used brightness.
• Locked Status
  In locked status, single clicking or pressing the switch will activate 2 blinks and then switch off to indicate locked status.

Intelligent Memory Circuit
The light memorizes the last selected brightness level on General mode. When turned on again the previously used brightness level will be recalled.

Overheat Protection
The light will accumulate a lot of heat when used on Turbo output level for extended periods. When a temperature of 55°C or above is reached, the light will automatically step down by a few lumens to reduce temperature. When the temperature is reduced, the output will gradually return to Turbo output level.

Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output mode, the flashlight blinks three times every five minutes to remind you to replace the batteries. To ensure normal use, the flashlight will not turn off automatically and will work till the battery level runs out completely.

Battery Replacement
Unscrew the tail cap to insert the battery with the polarity markings accordingly to the signs in the flashlight, and then screw the tail cap back on.